Device management
You can disable the unit’s individual hardware features to prevent access to certain functions.
IMPORTANT
•
A unique password must be set in order to use this feature. If you forget this password, there is no way to reset it (it is not erased if the unit is reset using the factory data reset utility) and therefore you will no longer be able to change this feature's settings. If you forget the password, contact your technical support representative.
Disabling and enabling certain hardware features
1.
From the home screen, tap → [DeviceManagement] → [Device setting items].
2.
Select the desired feature and then select the desired setting.
•
Repeat this step to change the settings for other features, if desired.
3.
Tap [Apply].
4.
Enter the current password for this feature, or follow the on-screen instructions and set a password.
Note
•
Most settings will take effect immediately; some settings will take place the next time the corresponding hardware component is connected, mounted, etc.
Changing the password used for [DeviceManagement]
1.
From the home screen, tap → [DeviceManagement] → [Password settings].
2.
Select the desired item and then follow the on-screen instructions.