Touch operation settings
You can select or adjust the following touch operation modes to suit your working conditions.
–
Glove touch mode: Makes the screen more sensitive to touch operations. Useful when operating the unit while wearing gloves.
–
Rain sensing touch mode: Prevents accidental operation when the screen is wet. The screen recognizes touches by the amount of pressure you apply to the screen with your finger.
Enabling touch operation modes
1.
From the home screen, tap → [Settings] → [Display] → [Touch operation mode].
2.
Tap the switch of the desired modes to turn them on.
Note
•
You can also turn touch operation modes on or off by tapping [Glove touch] / [Rain sensing touch] in the power options menu (see Power options menu). In addition, you can use the [UserButtonManager] app to assign these features to the unit's buttons (see [UserButtonManager] app).
•
Turn glove touch mode off when you are not wearing gloves.
•
Even if glove touch mode is enabled, the unit may not be able to be operated while wearing certain types of gloves.
•
When rain sensing touch mode is enabled, the screen operates in single-finger touch mode (i.e., only one finger press is recognized at a time) and responds by being firmly pressed with a finger.
•
Even if rain sensing touch mode is enabled, the unit may not be able to be operated or may not respond properly to touches when the entire screen is wet or depending on the amount of water on the screen. Temporarily put the unit to sleep mode and wipe the water off of the screen.
Advanced settings of the touch operation modes
1.
From the home screen, tap → [Settings] → [Display] → [Touch operation mode].
2.
Tap → [Advanced].
3.
Select the desired feature and configure it as desired.
–
[Glove thickness]: Set the screen sensitivity according to the glove thickness.
–
[Coordinates offset]: Set the amount of coordinate offset when operating with gloves. When set to [Auto], the offset is automatically set according to the [Glove thickness] setting.
–
[Rain condition]: Set according to the amount of rain falling on the screen, i.e., how wet the screen is.
•
When [Rain condition] is set to [Heavy], "tap and hold" operations are limited to 2 seconds.
–
[Pressure sensitivity]: Set the amount of pressure required for the screen to respond to touch operations.
•
If the screen is very wet, select a lower setting. In this case, you will need to apply more pressure to the screen in order to make it respond. If the screen is less wet, select a higher setting. In this case, you will need to apply less pressure to the screen in order to make it respond.