The indicator flashes in orange.
•
The battery cannot be charged temporarily because the ambient temperature is too low or too high. Leave the unit in an environment of 10 °C to 35 °C for about an hour.
The indicator lights in red.
•
The remaining battery level is approximately less than 15 % of a full charge. Charge the battery.
The indicator flashes in red.
•
Battery authentication failed. Use only a specified battery.
•
There may be debris lodged in the battery charge terminals. Remove the battery and remove any debris found.
•
Charging may have stopped automatically after a preset amount of time passed. Disconnect the AC adaptor, reconnect it, and then turn on the unit. If the problem persists when charging, contact your technical support representative.
The indicator does not light during charging.
Battery charging ends quickly, or the battery cannot be charged at all.
•
The AC adaptor cable or USB cable is not connected properly. Confirm all connections, remove the AC adaptor cable or USB cable, and then insert it again. Make sure the AC adaptor plug or micro USB plug is inserted fully into the unit.
•
There may be debris lodged in the battery charge terminals. Remove the battery and remove any debris found.
•
Replace the battery with a new one.
