|
Follow the instructions below
when an error message appears. If the problem persists or if the error
message is not shown here, contact Panasonic Technical Support.
| Error Message |
Solution |
| Bad System CMOS |
An error has occurred in the memory of system settings. This occurs when the memory content is changed by an unexpected program operation, etc.
- Start the Setup Utility and return the settings to the default values, and then change the settings as necessary.
- If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support.
|
| System CMOS Checksum Error |
| Invalid Year. System date restored to 01/01/20XX |
The date and time settings are not correct.
- Start the Setup Utility and set the correct date and time.
- If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support.
|
| Press <F2> to enter setup |
- Write down the error details and press «F2» or «Del» to start the Setup Utility.
Change the settings if necessary.
|
| Please use the recommended AC adaptor |
- Use the specified AC adaptor.
|
|