TOUGHBOOK Client Deployment Support

Description
Commands through PowerShell to configure BIOS settings of your Panasonic computer.

OS
Windows 11 Pro
Windows 10 Pro

Target model
CF-33[A/B/C/L/M/N/V/W] (mk1), CF-33[G/J/K/R/S/X/1/2/3] (mk2), CF-33[T/U/4/5/6/7] (mk3), CF-33[Y/8/9/0] (mk4), CF-FV4S (mk2 US-model), FZ-40[A/B/C/D] (mk1), FZ-40[E/F/G/H] (mk2), FZ-55[A/B/C] (mk1), FZ-55[D/E/F] (mk2), FZ-55[G/J] (mk3), FZ-G2[A/B/C/D] (mk1), FZ-G2[E/G/K/M] (mk2), FZ-G2[N/P] (mk3)

Installer package
Download（4,992,088 bytes）
* Please refer to the following Notes

PowerShell Gallery
PowerShell Gallery Link

Notes
Please install and use the following required software/driver.
- System Interface Device - 0021 or System Interface Device - 0040
Do not use version 2.10011.0.0 and remove it from your system.
Before installing or uninstalling the application, you should
- Sign in with Administrator account
- Connect AC Adaptor and have fully charged battery.
Please use the same keyboard layout as when setting the password.
For the END USER LICENSE AGREEMENT, please refer to the "License Info" on the PowerShell Gallery website.

IT Admin Manual
[2.10310.200.0/2.3.1000.200]
English (pdf file)Download
French (pdf file)Download
German (pdf file)Download

About Previous version

Release Note
[2.10310.200.0/2.3.1000.200]
Fixes/Updates:
- Supported 5G Module for FZ-55mk3
- Added commands
Get/Set-PanasonicWWANDeviceSwitch
Get/Set-PanasonicExtensionPort
- Change the method of retrieving firmware version in Get-PanasonicWWANModule
- Supported new models.

Known Issues:
- The operation of installing using both PowerShell Gallery and setup.exe is not supported.
- For some WWAN modules, the firmware version is not displayed.
- Depending on the combination of pre-installed language, display language, and system locale, the END USER LICENSE AGREEMENT and command output results may be displayed in a different language.

About Previous version

Description
Commands through PowerShell to configure settings on your Panasonic computer.

OS
Windows 11 Pro
Windows 10 Pro

Target model
CF-33[A/B/C/L/M/N/V/W] (mk1), CF-33[G/J/K/R/S/X/1/2/3] (mk2), CF-33[T/U/4/5/6/7] (mk3), CF-33[Y/8/9/0] (mk4), CF-FV4S (mk2 US-model), FZ-40[A/B/C/D] (mk1), FZ-40[E/F/G/H] (mk2), FZ-55[A/B/C] (mk1), FZ-55[D/E/F] (mk2), FZ-55[G/J] (mk3), FZ-G2[A/B/C/D] (mk1), FZ-G2[E/G/K/M] (mk2), FZ-G2[N/P] (mk3)

Installer package
Download（4,105,160 bytes）
* Please refer to the following Notes

PowerShell Gallery
PowerShell Gallery Link

Notes
Please install and use the following required software/driver.
- System Interface Device - 0021 or System Interface Device - 0040
- Panasonic PC Hub
Before installing or uninstalling the application, you should
- Sign in with Administrator account
- Connect AC Adaptor and have fully charged battery
For Microsoft Configuration Manager
- When using Get/Set commands via Software Center, please register them as a package, check "run with user's rights", and specify "Sysnative" in the command line.
For the END USER LICENSE AGREEMENT, please refer to the "License Info" on the PowerShell Gallery website.

IT Admin Manual
[3.10011.0.0/3.0.1100.0]
English (pdf file)Download
French (pdf file)Download
German (pdf file)Download

About Previous version

Release Note
[3.10011.0.0/3.0.1100.0]
Fixes/Updates:
- Supported new models.

Known Issues:
- The operation of installing using both PowerShell Gallery and setup.exe is not supported.

About Previous version

Description
Commands through PowerShell to update BIOS and drivers on your Panasonic computer.

OS
Windows 11 Pro
Windows 10 Pro

Target model
CF-33[A/B/C/L/M/N/V/W] (mk1), CF-33[G/J/K/R/S/X/1/2/3] (mk2), CF-33[T/U/4/5/6/7] (mk3), CF-33[Y/8/9/0] (mk4), CF-FV4S (mk2 US-model), FZ-40[A/B/C/D] (mk1), FZ-40[E/F/G/H] (mk2), FZ-55[A/B/C] (mk1), FZ-55[D/E/F] (mk2), FZ-55[G/J] (mk3), FZ-G2[A/B/C/D] (mk1), FZ-G2[E/G/K/M] (mk2), FZ-G2[N/P] (mk3)

Installer package
Download（3,698,688 bytes）
* Please refer to the following Notes

PowerShell Gallery
PowerShell Gallery Link

Notes
Please install and use the following required software/driver.
- System Interface Device - 0021 or System Interface Device - 0040
Before installing or uninstalling the application, you should
- Sign in with Administrator account
- Connect AC Adaptor and have fully charged battery
For Microsoft Configuration Manager
For the END USER LICENSE AGREEMENT, please refer to the "License Info" on the PowerShell Gallery website. Please see the information for the drivers to be installed in the Panasonic support site.
Drivers

IT Admin Manual
[2.10111.0.0/2.1.1100.0]
English (pdf file)Download
French (pdf file)Download
German (pdf file)Download

About Previous version

Release Note
[2.10211.0.0/2.2.1100.0]
Fixes/Updates:
- Support the options to specify the severity
- Support the options to specify the software category

Known Issues:
- If Sound Driver is pre-installed, the same version of that is detected.
If you update once, that will not be detected.
- The operation of installing using both PowerShell Gallery and setup.exe is not supported.
- The AMD Graphics Driver is not supported for the FZ-40[E/F/G/H](mk2) running Windows 10 version 21H2 or Windows 10 version 22H2 because it may cause a BSOD if installed on a clean OS. If you need to install the AMD Graphics Driver on a clean OS for these models, please apply the driver package instead.
- Intel Connectivity Performance Suite driver may not be listed or installed on clean OS in specific models or OS versions. If it is not listed or installed, please try the latest Windows Update first. The absence of this driver will not create any problem with your computer. For more information please see the following page.
IntelR Connectivity Performance Suite for IntelR Wireless Products

About Previous version

Description
Panasonic Windows application to set BIOS settings from a GUI interface.

OS
Windows 11 Pro
Windows 10 Pro
Windows 10 Enterprise LTSC2019 KB5031361 or later

Target model
CF-33[A/B/C/L/M/N/V/W] (mk1), CF-33[G/J/K/R/S/X/1/2/3] (mk2), CF-33[T/U/4/5/6/7] (mk3), CF-33[Y/8/9/0] (mk4), CF-FV4S (mk2 US-model), FZ-40[A/B/C/D] (mk1), FZ-40[E/F/G/H] (mk2), FZ-55[A/B/C] (mk1), FZ-55[D/E/F] (mk2), FZ-55[G/J] (mk3), FZ-G2[A/B/C/D] (mk1), FZ-G2[E/G/K/M] (mk2), FZ-G2[N/P] (mk3)

Installer package
Download（100,144,224 bytes）
* Please refer to the following Notes

Notes
Please install and use the following required software/driver.
- System Interface Device - 0021 or System Interface Device - 0040
- Panasonic PC Command for PowerShell | BIOS Settings (Required when you use Script mode)
Please DO NOT use the previous software (version 2.3.1000.0) and delete it from your system.
Before installing or uninstalling the application, you should
- Sign in with Administrator account
- Connect AC Adaptor and have fully charged battery
The password is not reflected on the screen even when using "Import" function.
The settings such as Serial Port and UEFI Boot from Device may differ from those of BIOS Setup Utility. Please be sure to verify the configuration details.

IT Admin Manual
[2.10211.100.0/2.2.1100.100]
English (pdf file)Download
French (pdf file)Download
German (pdf file)Download

About Previous version

Release Note
[2.10311.0.0/2.3.1100.0]
Fixes/Updates:
- Supported 5G Module for FZ-55mk3
- Supported new models.

Known Issues:
- None

About Previous version

Description
This software is a dashboard tool for Panasonic computer that allows you to do the following:
- Configure various settings on Panasonic computer
- Quick access to Panasonic applications installed on your computer

* If Panasonic PC Settings Utility and Panasonic PC Day Night Mode Utility are installed, please uninstall them before installing Panasonic PC Hub

Version
Panasonic PC Hub                     3.10012.0.0/3.0.1200.0
Panasonic PC Hub (Service)     3.10012.0.0/3.0.1200.0
Panasonic PC Hub (Installer)     3.10012.0.0/3.0.1200.0

OS
Windows 11: OS Build 22000.675 (KB5013943) or later
Windows 10: OS Build 19042.1706, 19043.1706, 19044.1706 (KB5013942) or later

Target model
CF-33[A/B/C/L/M/N/V/W] (mk1), CF-33[G/J/K/R/S/X/1/2/3] (mk2), CF-33[T/U/4/5/6/7] (mk3), CF-33[Y/8/9/0] (mk4), CF-FV4S (mk2 US-model), FZ-40[A/B/C/D] (mk1), FZ-40[E/F/G/H] (mk2), FZ-55[A/B/C] (mk1), FZ-55[D/E/F] (mk2), FZ-55[G/J] (mk3), FZ-G2[A/B/C/D] (mk1), FZ-G2[E/G/K/M] (mk2), FZ-G2[N/P] (mk3)

Installer package
Download（775,965,552 bytes）
* Please refer to the following Notes

Microsoft Store
Microsoft Store Link
* No sign-in required with MS account

Notes
Please install and use the following required software/driver.
- System Interface Device - 0021 or System Interface Device - 0040
- System Interface Device - 0019
Before installing or uninstalling the application, you should
- Sign in with Administrator account
- Connect AC Adaptor and have fully charged battery
The following applications will be automatically uninstalled when installing this application:
- Panasonic PC Settings Utility
- Panasonic PC Day Night Mode Utility
The following applications may be updated when installing this application:
- System Interface Manager
For Microsoft Configuration Manager
- When using Get/Set commands via Software Center, please register them as a package and check "run with user's rights"

User Guide
[3.10012.0.0/3.0.1200.0]
English (pdf file)Download
French (pdf file)Download
German (pdf file)Download
Spanish / Italian / Swedish / Polish / Hungarian / Finnish / Czech / Slovak (zip file)
Download（4,392,919 bytes）

About Previous version

IT Admin Manual
[3.10012.0.0/3.0.1200.0]
English (pdf file)Download
French (pdf file)Download
German (pdf file)Download

About Previous version

Release Note
[3.10012.0.0/3.0.1200.0]
Fixes/Updates:
- Supported new models.
- Improved application stability.

Known Issues:
- In models equipped with both an internal WWAN module (4G) and an external WWAN module (5G), installing drivers for both WWAN modules may result in incorrect retrieval of WWAN module information. It is not recommended to install drivers for both WWAN modules.
- The numbers of satellites displayed on "Satellites in use", "Satellites" map or "Signal Strength" graph may sometimes differ from theactual numbers of available satellites. This issue does not affect the numbers of available satellites in the output log.

About Previous version